LiquaCast Rubber:
With 0% Shrinkage
Not a silicone rubber! This is a
revolutionary molding rubber that has all the characteristics of vulcanized
rubber molds, but without the packing or the vulcanizing. In addition to
being stronger, tougher, longer lasting and cheaper than other RTV
compounds, LiquaCast is also easier to mix, easier to vacuum/debubble and
easier to pour.
See Ferris Liquid Rubber &
Frames for the frames for this rubber
Quantity
Stock#
Price
Quantity
Stock#
Price
Quantity
Stock#
Price
1 Pound Kit
Liquicast1
$25.99
10 Pound Kit
Liquicast10
$79.95
50 Pound Kit
Liquicast50
$299.95
New!
LiquaCasticast
Ultra:
Extremely tough,
strong and tear resistant
LiquaCast
Ultra 0% shrinkage liquid RTV
rubber is even easier to work with because
of it's
simple 1:1
mix ratio EITHER BY
WEIGHT OR BY VOLUME
Like Liqua-Cast original, is
easy tomix, easy to
pour andeasy to
vacuum because of its very low viscosity it is as
liquid as cream.
0% shrinkage liquid RTV is a
firmer rubber is ideal for delicate & difficult to inject patterns.
Firmer rubber means less pattern
distortion during injection. Small channels
will not be squeezed closed during injection,
resulting in patterns that are not filled completely.
Great for filigree! Produces
molds with a mirror finish. Shiny
rubber surface means bright, shiny waxes.
Its extreme durability means that difficult molds
last and last and are less likely to break or tear in
use. Bright orange in color
and is packaged in plastic
containers in two-part kits
weighing 1 Kg., 8Kg. and 20 Kg.
Quantity
Stock#
Price
Quantity
Stock#
Price
Quantity
Stock#
Price
1 Kilo (2.2 lb.) Kit
LiquicastU2
$59.95
8 Kilo Kit
LiquicastU8
$199.95
20 Kilo Kit
LiquicastU20
$399.95
QuickSil Rubber: 0% Shrinkage
RTV in Only 15 MinutesQuickSil
is a revolutionary new 0% shrinkage jewelry molding rubber material that
makes tough, long lasting production molds with a high shine finish almost
instantly. QuickSil molds are not weak, delicate prototype molds that can be
used only once or twice. They will last
for thousands of uses and dozens of years.
QuickSil can be used for lost wax casting and can also be used for direct
casting of low temperature metals such as pewter, tin etc.
No careful and precise mixing
needed-- Just take equal handfuls.
Mixing is easy and simple.
Mold packing is easy too. Cures in
15 minutes without heat.
No need to heat up your vulcanizer.
Use it cold.
No vulcanizer? Even c-clamps or a
heavy book will do.
QuickSil molds are strong, tough and
long lasting.
QuickSil RTV Rubber, 2 lb Kit $44.95 each
Castaldo & Ferris-Ject Mold
Rubber- Castaldo is the world's most
popular jeweler's rubber. Strips are 17/8"
x 18" x 1/8"
thick. Rolls are 18" wide x 1/8" thick. 5 lb rolls are 3� feet long. 50
lb rolls are 35 ft. long. Precut is 17/8"
x 27/8"
x
1/8"
thick. The following hyperlink will take you to the
Castaldo web site.
Ferris-Ject Mold Rubber-
Premium grade, high performance rubber that offers exceptional
flexibility, workability and memory at an excellent price. Will
reproduce the most exacting details. Available in firm (white label) and
soft (green label). Green label is recommended for extremely thin
sections or filigree work. Strips are 1-7/8" x 18" x 1/8" thick.
Rolls are 18" wide x 1/8"
thick. 5 lb rolls are 3� feet long. 50 lb rolls are 35 ft. long. Precut
is 17/8"
x 27/8"
x
1/8"
thick.
An industry favorite for decades, this
material makes an excellent mold of the original article. Mold compound
forms a transparent rubbery substance when backed at 350° F, making it
very easy to see the model when cutting apart the mold. One quart makes
10-14 molds. See-Thru mold compound is typical of its kind of material in
that the resulting mold is very
flexible and tears very easily. It recommended that relief cuts are
not
made into molds made from See-Thru compound.
Back
to 
Vulcanizers
& Mold Frames
For more information
QuickSil
is a revolutionary new 0% shrinkage jewelry molding rubber material that
makes tough, long lasting production molds with a high shine finish almost
instantly. QuickSil molds are not weak, delicate prototype molds that can be
used only once or twice. They will last
for thousands of uses and dozens of years.
QuickSil can be used for lost wax casting and can also be used for direct
casting of low temperature metals such as pewter, tin etc.
