| Anvil |
Size |
Weight |
Stock# |
Price |
|
| Steel Bench Blocks-
Supports work for flattening and when laying out
designs. Case-hardened. Ground flat and smooth.
|
2½" x 2½" x ½" |
1 lb |
12.317 |
$14.45 |
 |
| 4"x4"½" |
3 lb |
12.319 |
$21.75 |
|
Bench Block Helper w/
Steel & Nylon Blocks - This three piece set
includes a thick vulcanized firm rubber base which absorbs shock, plus a
solid steel block which is 15/16"
(24mm) thick and 3" (75mm) in diameter. The third piece is a sturdy nylon
block the same size that fits into the rubber base for lighter, more
delicate work. This is a well made set, and allows one to hammer without
creating excess noise and vibration at the bench.
|
5" x 2½" |
2.5 lb |
DAP-500.30 |
$28.95 |
 |
|
Reversible Double Horn Anvil-
Machined from a solid block of tool steel. Case
hardened and highly polished. Riveting hole in top. Superbly
manufactured. Made in Europe. |
4½" x 15/8"
H |
1 lb |
166.00 |
$24.95 |
 |
Double Horn Anvils-
For precision work, our miniature horn anvils are drop forged steel, which
is then case hardened. Traditional models which have remained popular for
years. |
1½" x5½" |
1½ lb |
ANV-200.00
(European) |
$26.95 |
 |
| 1½" x 4½" |
1 lb |
ANV-205.00
(Economy) |
$19.85 |
Small Double Horn Anvil on Round Base-
Round base model has one flat and one round horn on cast steel base. |
2½" x 4" |
1½ lb |
ANV-220.00 |
$19.95 |
 |
Large Double Horn Anvil on Round Base-
A larger version of our excellent bench anvil, this model is about 3 times
the weight. It has a highly polished horn and top surface with a 5¾"
diameter base for greater stability. |
5½" x7½" |
4½ lb |
ANV-222.00 |
$34.95 |
| Large Single Horn Anvils-
Made of cast steel, larger anvils are excellent for a variety of uses
because of their weight.
They make great bench blocks for pounding on metal.
Good for applications where lower cost is essential.
|
5½" x2½" x 2½" |
1½ lb |
ANV-550.00 |
$19.95 |
 |
| 6½" x3½" x 2½" |
3½ lb |
ANV-555.00 |
$24.95 |
 |
Slot Anvil-
Used as a base for staking, riveting and drilling small parts. V-slot is
handy for removing pinions and similar items. Case hardened and ground flat
and smooth. Has 9 graduated holes, one size for stumps and 5 milled slots. |
1½" x1½" x ½" |
1 lb |
12.315 |
$19.10 |
 |
Hexagon Slot Anvil-
Used as a base for staking, riveting and drilling small parts. Case-hardened
and ground flat and smooth. Has 16 holes, graduated from 3/64" to ½". 5
milled slots. |
1" x
½" |
1½ lb |
ANV-170.00 |
$19.95 |
 |
| Brass Ring
Stamping Block- A favorite for almost 50 years, this high quality
block secures rings in a rounded cut-out which prevents flat spotting on the
shank. Has graduated sizes and shapes on both sides. |
|
1 lb |
BT-75 |
$49.99 |
 |