New Hermes Electronic Engraving Machine IS400
Back to   Engraving Equipment          GravoStyle '98 software

IS400

8 x 12"engraving area with a maximum 15.75"spindle travel.

With unsurpassed reliability and quality, the IS400maintains the highest standards set by New Hermes.

Complete access to the object to be engraved.

IS400allows cylindrical items with volume to be engraved by adapting the volume base.

Adjustable rotation speed from 11,000 to 20,000 rpm for machining of various materials.

Direct current spindle motor is very powerful, but quiet.

A complete range of spindles, clamping accessories and tools to suit every engraving need.

GravoStyle ‘98 software provides for the ultimate in efficiency and productivity from IS400.

Processing times are optimized thanks to enhanced electronics.

 

Mechanical Characteristics
X & Y Axis:
  • engraving area 305 x 120 mm (8 X 12 in.)    
  • flatness tolerance 0.2 mm (0.008 in.)
  • minimum clearance in X between columns 370 mm (14.6 in.)
  • minimum clearance in Y unlimited

Z Axis:

  • spindle travel 40 mm (1.57 in.)
  • spindle travel at bottom of vice 120 mm (4.72 in.)
  • max. spindle travel with clamping table 33 mm (1.30 in)

Spindle:

  • tool diameter 4.36 mm (11/64)
  • rotation speed 11,000- (11,000-20,000 t/min 20,000 rpm)
  • direct current motorization 75W (75W)

Clamping systems:

  • concentric tightening vice
  • opening of vice 230 mm (9 in.)
  • height of vise 76mm (3 in.)

Noise level:

  • empty * LA eq dB (A) <72±1
  • when engraving * LA eq dB (A) 80±2
  • peak when engraving Lp Cpeak dB (C) <9 in accordance with Gravograph standards
  • Net weight 50kg (110 lb)

Optional Accessories

 vacuum table with pump 

or

vacuum table without pump

T-slot table  $700

volume base and 350 mm (14") diamond cylinder drive           Price     $2,968

or

120 mm (4.7") diamond cylinder drive     

15 mm (0.6") diamond pen drive       

relay kit box

An electronic board kit, P/N 27-417-00M, is required to control these accessories, in addition to the part itself.  The same electronic board is used to pilot all accessories: cylinder attachments, pen attachments, relay kit boxes for the IS tables.
Also Available:
  • glass engraving kit
  • range of spindles (collet, diamond, HF,…)
  • lubrication system
    •

 

The I. Shor Co.

I. Shor Canada
Shor International Corporation
Fine Tools, Equipment and Innovative Products Since 1918
20 Parkway West, Mt. Vernon, N.Y. 10552
Phone (914) 667-1100 Fax (914) 667-0190

e-mail:

shorinternational@attglobal.net