Plastic injectors are used to inject plastic into metal molds.
They will produce patterns of incredibly fine detail with uniformity of size,
shape and weight. Shrinkage is undetectable and every pattern is identical with
the preceding and subsequent patterns. Metal molds can be made inexpensively
with the Shor Lok-Blok mold frames
Plastic patterns are almost impossible to break, distort or
damage, even if stored for years. Their sharpness is so fine that a loupe is
required to see all the detail. Delicate pieces that are absolutely impossible
to do in wax are child’s play in plastic. When bent, plastic patterns will
quickly return to their original shape.
Model 100-4, Manual Plastic Injector-
Easy to read and adjust digital temperature controller
Adjustable ram speed control
Aircraft spec. aluminum body
Easy to view material hopper
Stainless steel injection chamber and piston for corrosion
resistance
All pneumatic devices are of the "no-lube" design, making the
machine ideal for medical and other clean room applications
Working area protected by transparent safety-guard and safety red
heat shield.
Right and left hand operation
Mold stop and ejector
Quick acting clamp for easy operation
4" cylinder
6300 psi
Hardened screw and bronze nut for long wear
Price: $5,995
Model 150-4 Hydro Pneumatic Plastic Injector-
Easy to read and adjust digital temperature controller
Lever operated power clamp
Adjustable mold stop with automatic ejector
Adjustable mold clamp for different thickness molds.
Ergonomic workstation design
Aircraft spec. aluminum body
Stainless steel injection chamber and piston for corrosion
resistance
All pneumatic devices are of the "no-lube" design, making the
machine ideal for medical and other clean room applications
Working area protected by transparent safety-guard and safety red
heat shield.
Machine is transportable. Does not require a permanent
installation.
Price: $7,995
Model 200-4, Semi-Automatic Plastic Injector-
Easy to read and adjust digital temperature controller
Adjustable mold stop with automatic ejector
Adjustable mold clamp for different thickness molds
Aircraft spec aluminum body
Adjustable sequencing and injection cycle, 5-99 seconds
Built-in resetable production counter
Stainless steel injection chamber and piston for corrosion
resistance.
Working area protected by transparent safety-guard and safety red
heat shield.
Machine is transportable. Does not require a permanent
installation.
Price: $8,995
Model 300-4, 400-4
Workstation Plastic Injector-
Floor model "sit down" agronomical work station design
Foot air-operated hopper to free operator's hands for faster
handling of molds.
Adjustable mold stop with automatic ejector.
Adjustable mold clamp for different thickness molds
Adjustable sequencing and injection cycle, 5-99 seconds
Adjustable clamping, injection and ejection sequencing on
front panel
All pneumatic devices are of the "no-lube" design, making the
machine ideal for medical and other clean room applications
Stainless steel injection chamber and piston for corrosion
resistance.
Working area protected by transparent safety-guard and safety
red heat shield.
Machine is transportable. Does not require a permanent
installation.
Model 400-4 is double capacity
Model 300-4 Price: $10,995
Model 400-4 Price $15,995
Back
to
